AccessoriesLiftmoore offers the accessories that will aid you in mounting your crane.
BOOM RESTS
Designed for each model.
Designed so that the Boom stores in a horizontal position.
PEDESTALS - FOR FLAT BED MOUNTING
Designed to match the mounting requirements of crane.
Heights up to 36 inches can be supplied.
For taller pedestals contact Liftmoore. Advise height when ordering.
| Item Number | Pedestal |
|---|---|
| 18375 | PEDESTAL, 12K FT-LB 18"+ HEIGHT:___" FOR ABOVE 18" |
| 22796 | PEDESTAL, 12K FT-LB 18"- HEIGHT:___" FOR 18" & BELOW |
| 34076 | PEDESTAL, 16K FT-LB HEIGHT:_____" |
| 32624 | PEDESTAL, 25K/36K FT-LB/18"+ HEIGHT:_____" FOR ABOVE 18" |
| 23176 | PEDESTAL, 40K FT-LB / 18"+ HEIGHT:_____" FOR ABOVE 18" |
| 33654 | PEDESTAL, 50K FT-LB / 18"+ HEIGHT:_____" FOR ABOVE 18" |
| 22807 | PEDESTAL, 72K FT-LB VH HEIGHT:_____" FOR ABOVE 18" |
MOUNTING PLATES
Mounting plates are for welding onto the truck body. They are fabricated to fit under the crane matching the bolt pattern and cutouts needed.
| Item Number | |
|---|---|
| 30684 | PLATE, MOUNTING L-21F/L-22/206 0.50" x 12" x 12" DRILLED FOR L-SERIES AND LA6K |
| 28694 | PLATE, MOUNTING 2010 & 3612 MACH 0.50" X 14" X 14" FOR 2010 & 3612 |
| 30685 | PLATE, MOUNTING 2700/3200 MACH 0.50" x 15" x 15" for 208, 2000A, LA10K, 2700, 3200 & 1032. |
| 16698 | PLATE, MOUNTING 4000 MACH 0.75" x 15" x 15" for 4000 & 1640 |
| 31821 | PLATE, MOUNTING 25K/36K MACH. 0.75" x 16.75" x 16.75" FOR 5000, 2550, 3055, 6036, & 3660 |
| 22136 | PLATE, MOUNTING 4064 MACH 0.75" x 17.75" x 17.75" FOR 4064 |
| 22925 | PLATE, MOUNTING 45K MACH 1.0 X 18.50 SQR. FOR MODEL 8045 |
| 33905 | PLATE, MOUNTING 50K MACH. 1.00" x 16.75" x 16.75" FOR 5080 |
| 21954 | PLATE, MOUNTING 72K MACH. 1.25" x 21" x 21" FOR 60100 & 72100 |
RECOMMENDED HYDRAULIC COMPONENTS
| Item Number | Component |
|---|---|
| 24211 | KIT, RESERVOIR 10G. W/FILTER 10 Gallon hydraulic reservoir with return line filter, no hoses or fittings. (40 Lbs.) Maximum 6 gpm system with only a crane |
| 27369 | VALVE, RELIEF ASSY W/FITTINGS Adjustable Pressure Relief Valve for all hydraulic cranes |
| 24679 | VALVE, VARIABLE FLOW CONTROL For all hydraulic cranes - no fittings |
SERVICE TOOLS
| Item Number | Tool |
|---|---|
| 26684 | TOOL, CRANE DIAGNOSTIC WIFI |
| 26304 | BOX, PENDANT TEST |
| 26386 | ADAPTER, WIRE 14-PIN TO 10-PIN WIRES HARNESS USE W/26304 |
| 26391 | WRENCH, LOCKNUT WELDMENT AN-19 Fits 2700,3200 & 1032 |
| 26503 | WRENCH, LOCKNUT WELDMENT AN-20 Fits 4000 & 1640 |
| 26681 | TOOL, CRIMP DEUTSCH |
| 18759 | EXTRACTOR, DEUTSCH 16 GA PIN |
| 27348 | KIT, PALM PILOT DIAGNOSTICS |
| 26905 | GAUGE, FLOW METER Adjustable Flow Meter, to test hydraulic system fittings not included |
| 26906 | PRESSURE GAUGE, 0-5000 PSI Liquid Filled, to test hydraulic system, fittings not included |
| TTCT-1001 | EWH, REPROGRAMMING KTFM |